Automatic Circular Cold Saws VA-L 350 and VA-L 560

The low-noise, high-performance choice

The VA-L fully automatic straight cutting saw series are designed specifically for aluminium and NF metals and has totally redefined the standard when it comes to volume sawing of solid material, pipes and profiles with complex crosssections.
Their consistently high yield makes them a valued mainstay for renowned aluminium processing firms and producers the world over.

Short processes in sawing operation

Key features of the series are the robust design, state-of-the-art drive technology used in the feed axis and main drive system, and the extreme rigidity of the ultra-precise saw spindle bearing. The result: an optimized, low-vibration cutting process providing extreme cutting output, excellent surface quality and maximum availability.

Pneumatic or hydraulic clamping

You have the choice between a pneumatic clamping fixture for gentle clamping and a hydraulic alternative for greater power when processing predominantly solid material. For parallel cuts, both systems are able to cope easily even where a slight torsion exists in the material.

Two feeding systems

The frequency-controlled main drive system offers scope for adjusting the cutting speed to the sawing process so that both high-strength Al-Si alloys and thin-walled pipes and profiles can be sawn. Two saw feed systems are available: Hydraulic as standard and servo motor-controlled feed as a high-performance option.


Technical Data

Model VA-L 350 NC1VA-L 350 NC2
Downfeed system hydraulicservo drive
Cutting range 90°90°
Saw blade standard Ø[mm]350350
Round[mm]115115
Rectangular[mm]200 x 70200 x 70
Square[mm]105 x 105105 x 105
RPM[min-1]800 - 4200800 - 4200
Drive power[kW]1515
Feeding length single stroke[mm]970970
Max. feed rate[mm/sec]8001000
Dimensions L x W x H
without tunnel on infeed side
[mm]1925 x 2660 x 27402460 x 2550 x 1850
Weight[kg]ca. 1250ca. 1550
Model VA-L 560 NC1VA-L 560 NC2
Downfeed system hydraulicservo drive
Cutting range 90°90°
Saw blade standard Ø[mm]560560
Round[mm]200200
Rectangular[mm]300 x 150300 x 150
Square[mm]170 x 170170 x 170
RPM[min-1]800 - 3200800 - 3200
Drive power[kW]2626
Feeding length single stroke[mm]970970
Max. feed rate.[mm/sec]8001000
Dimensions L x W x H
without tunnel on infeed side
[mm]2200 x 2650 x 27402460 x 2550 x 1850
Weight[kg]ca. 1800ca. 2100

Sort by
Display per page

VA-L 350 NC1

VA-L 350 NC1
Hydraulic Downfeed System
Cutting range 90° Round (mm) : 115
Cutting range 90° Rectangular (mm) : 200 x 70
Cutting range 90° Square (mm) : 105 x 105

VA-L 350 NC2

VA-L 350 NC2
Servo drive Downfeed System
Cutting range 90° Round (mm) : 115
Cutting range 90° Rectangular (mm) : 200 x 70
Cutting range 90° Square (mm) : 105 x 105

VA-L 560 NC1

VA-L 560 NC1
Hydraulic Downfeed System
Cutting range 90° Round (mm) : 200
Cutting range 90° Rectangular (mm) :300 x 150
Cutting range 90° Square (mm) : 170 x 170