Lankhorst Mouldings

Diameter coils: 1250-1800 mm
Coil width: 900-1300 mm
Coil weight: max 10 ton
Product measurements: L: 1200 mm W: 1150 mm H: 358 mm

Diameter coils: 1250-1800 mm
Coil width: 900-1300 mm
Coil weight: max 15 ton
Product measurements: L: 1200 mm W: 1150 mm H: 337 mm

Diameter coils: 1250-1800 mm
Coil width: 1200-1700 mm
Coil weight: max 15 ton
Product measurements: L: 1600 mm W: 1150 mm H: 358 mm

Diameter coils: 546-2500 mm
Coil width: 1200 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 40 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 HR

Diameter coils: 727-2500 mm
Coil width: 1200 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 80 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS100 or Rail RS100 WR

Diameter coils: 546-2500 mm
Coil width: 1500 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 40 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 WR

Diameter coils: 727-2500 mm
Coil width: 1500 mm (wider coils if the coil is aligned in the centre of the CoilWedges) - contact us for further information
Max load: 80 tons
Temperatures up to 60 °C
Chock angle: 21°
For stacking up to 2 levels
To be used together with Rail RS100 or Rail RS100 WR

For applications where spacers are not used, the rail needs to be fixated to the floor and protected using End caps
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS100 and Rail RS100 Outdoor (WR)

For applications where spacers are not used, the rail needs to be fixated t the floor and protected using End caps
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

The installation Tool RS100 is used to tighten the Steel Connector RS100 when connecting rail lengths over 4 meters
The Installation Tool RS100 ensures that you get the correct space between connected rails RS100, to ensure the blocks (RollStop RS100, CoilWedge 120/45 or CoilWedge 150/45) can also be placed over the joints
One to two Installations tools are needed for a complete system, depending on the size of the system and the number of people installing the system

The installation Tool RS40 is used to tighten the Steel Connector RS40 when connecting rail lengths over 4 meters
The Installation Tool RS40 ensures that you get the correct space between connected rails RS40, to ensure the blocks (RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle) can also be placed over the joints
One to two Installations tools are needed for a complete system, depending on the size of the system and the number of people installing the system

For oily coils the OilStop can be used to collect the dripping oil and prevent the oil from staining the floor
For use on the RS100 systems

For oily coils the OilStop can be used to collect the dripping oil and prevent the oil from staining the floor
For use on the RS40 systems

Diameter coils: 500-2500 mm
Max load: 50 tons
Can also be used together with Steel frame for slit coils

Diameter coils: 500-2500 mm
Max load: 50 tons
Can also be used together with Steel frame for slit coils

Diameter coils: 500-2500 mm
Max load: 50 tons
Can also be used together with Steel frame for slit coils

Heat resistant version, for temperatures up to 110°C
Diameter coils: 500-2500 mm
Max load: 50 tons
Can also be used together with Steel frame for slit coils

Diameter coils: 500-2500 mm
Max load: 50 tons

Used together (in pair) with Tunnel End spacer RS100 at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS100 and Rail RS100 Outdoor (WR)

Used together (in pair) with Tunnel End spacer RS40 at the end of each rail section to fixate the parallell rails at a correct distance from each other, depending on coil width, and to protect the edges of the rail
2 pcs per linked rail section is needed (one in each end) regardless of section length
For Rail RS40 and Rail RS40 Outdoor (WR)

To be used togehter with the RollStop RS100 or CoilWedge 120/45 or 150/45
1 pc rail =4 meters
Always used in pairs of two
Also available in weather resistant version (Lankhorst Rail RS100 Outdoor (WR))
To create lengths over 4 meters, the Steel Connector RS100 must be used

Weather resistant version for outdoor use
To be used togehter with the RollStop RS100 or CoilWedge 120/45 or 150/45
1 pc rail =4 meters
Always used in pairs of two
To create lengths over 4 meters, the Steel Connector RS100 Outdoor (WR) must be used

To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
Also available in Weather resistant version (Lankhorst Rail RS40 Outdoor (WR)
To create lengths over 4 meters, the Steel Connector RS40 must be used

Weather resistant version for outdoor use
To be used togehter with the RollStop RS40, CoilWedge 120/34 or 150/34 or RollCradle system
1 pc rail =4 meters
To create lengths over 4 meters, the Steel Connector RS40 Outdoor (WR) must be used

Used together (in pair) with Tunnel spacer RS100 to fixate the parallell rail pieces at a correct distance from each other, depending on coil width
One pc per 4 meters is needed for lenghts over 4 meters
For RailRS100 and Rail RS100 Outdoor (WR)

Used together (in pair) with Tunnel spacer RS40 to fixate the parallell rail pieces at a correct distance from each other, depending on coil width
One pc per 4 meters is needed for lenghts over 4 meters
For Rail RS40 and Rail RS40 Outdoor (WR)

UNP channel: 140
Diameter coils: 500-2500 mm
Max load (using 4 Rollblocks): 30 tons
Temperatures up to 60°

UNP channel: 180
Diameter coils: 875-2500 mm
Max load (using 4 Rollblocks): 100 tons
Temperatures up to 60°

Heat resistant version, for temperatures up to 110°C
UNP channel: 180
Diameter coils: 875-2500 mm
Max load (using 4 Rollblocks): 100 tons
Temperatures up to 110°C

UNP channel: 180
Diameter coils: 500-2500 mm
Max load (using 4 Rollblocks): 60 tons
Temperatures up to 60°

Diameter coils: 711-1900 mm
Coil width: 900-1600 mm (using spacers)
Max load: 40 tons
Temperatures up to 60 °C
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 WR

Diameter coils: 901-2100 mm
Coil width: 900-1600 mm (using spacers)
Max load: 80 tons
Temperatures up to 60 °C
For stacking up to 2 levels
To be used together with Rail RS40 or Rail RS40 WR

Coil diameter: 940-1050 mm
Product weight: 46 kg

Coil diameter: 1050-1160 mm
Product weight: 50 kg

Coil diameter: 1160-1300 mm
Product weight: 60 kg

Coil diameter: 1300-1450 mm
Product weight: 66 kg